2005 Arctic Cat ATVs factory service and repair manual, Page 386Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 386

17Rotate the crankshaft until the second cap screw securing the sprocket to the camshaft can be installed; then install the
to secure the cap screw19Place the C-ring into position in its groove in the cylinder 22Remove the cap screw from the end
of the chain tensioner; then using flat-blade screwdriver, rotate the adjuster screw inside the tensioner clockwise until
the screw bottoms I NOTE: The adjuster shaft will be drawn into the tensioner as the adjuster screw is rotated clockwiseThe
adjuster shaft tension will be released in step 24 20Install the cylinder head plug in the cylinder head with the opening