2005 Arctic Cat ATVs factory service and repair manual, Page 402Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 402

10Remove the intermediate shaft chain tensioner (A); then remove the circlip (B) and washer11Remove the intermediate shaft
the crankshaft without keeping tension on the camshaft chains or engine 8Remove the mm cylinder head cap screw (A); then
remove front 10 mm cap screws (B) and washers 12Install mm cap screw (A) in the tapped hole of the front camshaft drive gear
cover (B) and remove the coverAccount for one O-ring 9Remove the front cylinder head assembly and account for two alignment