2005 Arctic Cat ATVs factory service and repair manual, Page 419Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 419

3Place the assembled faces of the driven pulley on the pulley compressor base Assembling 1Apply multi-purpose grease to the
attach the spring holder (B) and tighten nut (A) until the circlip (F) can be installed 2Install the four pins into the fixed
face hub; then pack the cam slots in the movable face with multi-purpose greaseINOTE: Installation of the pins can be simplified
by applying multi-purpose grease on the blade of screwdriver, placing the pin onto the grease, and installing the pin into