2005 Arctic Cat ATVs factory service and repair manual, Page 424Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 424

5Retighten the holding bolts and repeat steps and until the bevel gear can be removed fi-om the housing; then remove the
HDrive Bevel Gear ATV2071 3Loosen the bevel gear (B) using an Allen wrench while holding the housing (A) in vise; then continue
to turn the bevel gear (about 4-5 turns) until the retainer nut is fi-ee of the holding bolts 7Remove the outer ball bearing
(A) using suitable seal and bearing remover (B); then remove the retainer nut and ihe inner ball bearing, 4Loosen the holding