2005 Arctic Cat ATVs factory service and repair manual, Page 430Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 430

4Apply grease to the steel ball (A) and spring (B); then install the steel ball, spring, washer (C), and shift shaft positioning
separate the crankcase halves to locate the problem6Using the bearing driver (A), drive the bearing into the housing until
it bottoms out 9Press the outer ball bearing in until it is bottomed out 10Using the bearing driver (A), drive the bearing
into the output drive bearing housing until it bottoms out7Place the bearing housing into the holding fixture; then apply
blue Loctite #242 on the threads of the bearing retainer (A)Install with the dished side (B) directed away from the bearing