2005 Arctic Cat ATVs factory service and repair manual, Page 438Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 438

8Install the one-way clutch so the flange (A) fits on the recess (B) of the race; then install on the rotorlflywheel and
clean and install the rotorlflywheel (B) while turning the starter clutch gear 12Install new O-ring (A) in the collar (B);
then apply grease to the O-ring and install the collar into the alternator cover10Ensure that the alignment pins (A) are
installed; then install the bearing (B) 13Align the holes in the starter cup (A) with the pins (B) in the collar; then hold