2005 Arctic Cat ATVs factory service and repair manual, Page 439Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 439

#1 Compression Rina End Gap S3 Thin #3 Thin Oil Ring Oil Ring End Gao End Gap #2Ring End Gap and Oil Ring Expander End Gap
making sure there is circlip on each side and the open end of the circlip (A) does not align with the notch (B) in the pistonI
NOTE: The pistons should be installed so the is directed toward the front on both front and rear pistons I NOTE: If the piston
rings were removed, install them in this sequence AInstall ring expander (4) in the bottom groove of the piston; then install
the thin oil rings (3) over the expander making sure the expander ends do not overlapStagger the end gaps of the upper and