2005 Arctic Cat ATVs factory service and repair manual, Page 440Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 440

2Install two alignment pins (A) for each cylinder; then position new base gasket (B) as shown 5Install the cylinder heads
the cam chain guide (C) and the oil pipe (D) 6Using wrench on the alternator bolt, turn the crankshaft clockwise to align
the "TR" mark (A) with the notch (B) in the inspection window 4Locate alignment pins (A) as shown; then place new head gasket
(B) into position and install the oil pipe (C) and camshaft chain guides (D) 7Install the rear camshaft (A) identified by
the groove (B) 8Direct the arrow (A) of the rear camshaft upward (left side view); then engage the rear camshaft sprocket