2005 Arctic Cat ATVs factory service and repair manual, Page 441Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 441

9Release the ratchet (A) and press the push rod (B) into the camshaft chain tensioner body; then install on the appropriate
head 13Using wrench on the alternator bolt, turn the crankshaft clockwise 270' and align the "TF" mark (A) with the notch
(B) in the inspection window 11Install the rocker case making sure that the rocker arms and adjuster screws do not have pressure
on them; then tighten the rocker case cap screws as follows: 1-4 with washers, 0.9 kg-m (6.5 ft-lb); and 6, 1.0 kg-m (6.5
ft-lb); (A) 1.0 kg-m (7.0 ft-lb)Use the illustrated tightening sequence for cap screws 1-6 14Repeat steps 8-12 for the front