2005 Arctic Cat ATVs factory service and repair manual, Page 459Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 459

I NOTE: Turn the pilot air screw clockwise until it is lightly seated; then turn it counterclockwise the recommended number
position making sure the O-ring is properly positioned; then secure with the Phillips-head screws 3Install the slow jetTighten
securely4Install the main jet into the needle jet holder and tighten securely; then install the needle jet holder assembly
into the carburetor and tighten securely 5Place the float assembly (with float needle valve) into position and secure to
the carburetor with the float pin 7Place the U-ring into the primer housingPosition the spring and diaphragm assembly (lip