2005 Arctic Cat ATVs factory service and repair manual, Page 462Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 462

REMOVING 1Turn the ignition switch to the OFF position; then remove the ignition switch key 6Remove the screw securing the
gas hoses from the carburetors 5Remove the screws securing the lower air filter housing to the carburetors; then remove the
lower housing and tape over the carburetor inlets 7Remove the throttle cable from the actuator arm Severe engine damage will
occur if hardware items or other foreign objects are ingested by the engine on start-up 8Loosen the outer jam nut securing