2005 Arctic Cat ATVs factory service and repair manual, Page 469Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 469

3Inspect gas tank valve, tank cap, and tank for leaks, holes, and damaged threads4Inspect the gas gauge for proper operationINSTALLING
all hoses for cracks or leaks Gas Tank (TBX500650 H11650 V-Twin) 3Inspect tank cap and tank for leaks, holes, and damaged
threadsINSTALLING 1Place the gas tank into position in the frame; then install the cap screwsTighten securely2Connect the
gas hose(s) from the carburetor(s); then connect the fuel gauge connector 3Install the vent hose; then fill the gas tank
with gasoline4Turn the ignition switch to the ON position (650 V-Twin) or start the engine (on other models) and inspect
for leakage5Install the rear fenders and rack (5001650 Hll650 V-Twin); then install the seat making sure it latches securely
7Hose Clamp Gas Tank TankCap Gasket Sender Seal Filter 8910111213Hose Fuel Pump Screw Lock Nut Hose Clamp Fitting 1415161718
Grommet Shield Shield Shield Cap Screw Whenever any maintenance or inspection is made on the fuel system during which there
may be fuel leakage, there should be no welding, smoking, open flames, etc in the areaPage: 469 Arctic Cat ATV 2005 -All