2005 Arctic Cat ATVs factory service and repair manual, Page 470Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 470

INSTALLING Gas Tank Valve (250300400 FISACTTRV) 1Place the valve and gasket into position on the tank and secure with the
the operator to use the remaining gasoline in the tankWhen turning the valve to any of the three positions, be sure the indicator
is pointed directly at the position desired Electric Fuel Pump (650 V-Twin) The electric fuel pump and fuel level sensor
are non-serviceable assemblyIf either fails, the fuel pump assembly must be replacedIFor testing the fuel pump, see Testing
Electric Fuel Pump in this section Drain the gas tank prior to this procedure 1Remove the gas hose from the valve by releasing
the spring clamp2Remove the two nuts securing the valve; then remove the valveAccount for the gasket Vacuum Pulse Fuel Pump
(TBX500650 ) 3Inspect the gasket and valveltank mating surfaces for damage or deterioration4Inspect for and remove any obstructions