2005 Arctic Cat ATVs factory service and repair manual, Page 476Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 476

REMOVING Oil Cooler (250300400) I NOTE: It is not necessary to drain the engine oil for this procedure 1Remove the input
Hose (Input) Fitting Fitting 9Cap Screw 100-Ring 3Remove the oil cooler from the frame400 INSTALLING 1Place the cooler into
position in the frame 2Secure the cooler to the frame with the can screws and grommets KEY 1234567 Oil Cooler Assy Oil Cooler
Screen Thumb Screw Shroud Machine Screw Fan 891011121314 Drain Plug 0-Ring Grommet Nut wWasher Shoulder Screw Bushing Clamp