2005 Arctic Cat ATVs factory service and repair manual, Page 484Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 484

2Connect the two coolant hoses to the water pump and secure with the clamps W NOTE: While the cooling system is being filled,
V-Twin) W NOTE: Check for water pump seal leakage by examining drain catch tank (A) 4Place the footrest into position on
the fiame and loosely secure with four cap screws; then secure the front and rear fenders to the footrest with the four tom-head
cap screwsTighten the four tom-head cap screws securely; then tighten the remaining cap screws to specifications 5Fill the
engineltransmission with the proper amount of recommended oil 6Fill the cooling system with the proper amount of recommended