2005 Arctic Cat ATVs factory service and repair manual, Page 488Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 488

WNOTE: It is important to install the fuel pump with the correct orientation to ensure adequate float lever clearance 4Connect
assembly AT THIS POINTPrior to removing the vacuum pulse fuel pump, the following check should be performed to determine
that removal is necessary INSTALLING 1Mark the new fuel pump with reference mark in the same location as the removed pump;
then place the new gasket on the pump2Remove the material covering the fuel pump opening; then carefully guide the fuel pump
into position taking care not to damage the float or float lever Whenever any maintenance or inspection is made on the fuel
system during which there may be fuel leakage, there should be no welding, smoking, open flames, etc in the area 1Disconnect
the fuel pumplcarburetor hose at the fuel pump; then connect hose and suitable pressure gauge to the fuel pump output fitting