2005 Arctic Cat ATVs factory service and repair manual, Page 503Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 503

1Disconnect the three-wire connector fi-om the speed sensor harness or fi-om the speed sensor; then remove the Allen-head
Gauge 4Neutral 1;dicator Light (-) 5Ignition (+) 6Not Used 7Not Used 8Water Temperature Sensor 9Not Used 10Not Used 11Belt
Indicator Light (-1 12Speedometer Illumination (+) 14Oil Pressure Warning Light (-) 15Reverse lndicator Light (-) 16' Battery
(-) ATV2208l 1Connect 12-volt battery with the positive wire to terminal (1) and the negative wire to terminal (16); then
connect jumper wire fi-om terminal (1) to terminal (5)All LCD displays on the speedometer should appear for one secondW NOTE:
If any functions (segments or displays) are not normal or display as indicated, the speedometer must be replaced Page: 503