2005 Arctic Cat ATVs factory service and repair manual, Page 514Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 514

Magneto Coil (Charging) I Set the meter selector to the D.CVoltage position2Connect the red tester lead to the black wire;
the negative battery cable battery first; then disconnect the 8Slide the armature free of the starter housing 2Remove the
nut securing the positive cable to the starter; then remove the cable from the starter 3Remove the two cap screws securing
the starter to the crankcase; then remove the starterAccount for the wiring forms and an O-ring4For assembly purposes, scribe
line across the outside of the starter assemblv 5Remove the two long starter cap screws securing the starter components 9Bend