2005 Arctic Cat ATVs factory service and repair manual, Page 564Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 564

I NOTE: Grease Pack (pln 0441-173) contains 120 grams of greaseThe inside joint (double-offset) requires approximately 70-90
the small end of the boot seats down into the recessed groove 7Using side-cutters (or suitable substitute), remove both outside
boot clamps from the shaftNote the position of the different-sized clamps for assembling purposes 10Using Boot Clamp Pliers
(pin 0444-120), secure both outside boot clamps 8Apply 40 grams (113 of contents) of grease from the Grease Pack (pln 0441-173)
into the knuckles and the new outside boot It is important that the clamps are positioned correctly or they may loosen when