2005 Arctic Cat ATVs factory service and repair manual, Page 567Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 567

Rear Suspension REMOVING 1Place the ATV on support stand (positioned just in front of and behind the footrest on each side)
securing the brake calipers to the bearing housing; then remove the calipers and lay aside 6Maneuver the axle assembly rearward
allowing the propeller shaft to disengage and the final drive boot to separate from the drive housingDISASSEMBLING 1Remove
the cap screws securing the gear case panel; then remove the panel from the gear case 4Remove the lower shock absorber cap