2005 Arctic Cat ATVs factory service and repair manual, Page 570Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 570

INSTALLING b the axle assemblymaking Sure propeller shaft splines engage properly and the final drive boot is positioned
absorber into the frame mounts and secure using the cap screws and hex nuts tightened to specifications Do not tighten nuts
beyond the 4.8 kg-m (35 ft-lb) specification or the shock eyelet or mount WILL be damaged Place the brake calipers into position
on the axle retainer assembly; then secure with the cap screws' Tighten the hydraulic caliper to specifications and the specifications'