2005 Arctic Cat ATVs factory service and repair manual, Page 587Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 587

6Install the knuckle assembly onto the ball joints and secure with cap screws& to specifications 10Secure the brake caliper
install new cotter pin and spread the pin to secure the nutI NOTE: During assembly, new cotter pins should be installed 11Secure
the hub nut (from step 9) to the shaftlaxleTighten to specifications 12Install new cotter pin and spread the pin to secure
the nut 8Apply grease to the hub and drive axle splines; then install the hub assembly onto the drive axle 13Install the