2005 Arctic Cat ATVs factory service and repair manual, Page 591Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 591

CLEANING AND INSPECTING I NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
are the specified size and have identical tread pattern INOTE: Make sure each wheel is installed on its proper hub as noted
in removing (the "rotation arrow" must indicate forward direction of rotation) 3check the front wheel toe-in and toe-out
and adjust as necessary (see Section 8)4Test drive the ATV on dry, level surface and note any pulling to the left or right
during acceleration, deceleration, and brakingI NOTE: If pulling is noted, measure the circumference of the frontand rear
tires on the pulling sideCompare the measurements with the tires on the opposite sideIf pulling is noted during braking only,
check and adjust the brakes as necessary and recheck operation (see Section 2) 5Increase the air pressure in the tires with