2005 Arctic Cat ATVs factory service and repair manual, Page 622Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 622

2Connect the headlight connectors to the appropriate headlights and the front accessory plug wires to the accessory plug
ties in the appropriate locations8Install the instrument pod and ignition switch; then secure with two reinstallable rivets
and the ignition switch lock collar 4Install one machine screw and flange nut and four plastic rivets on each side to secure
the front fenders to the footwellsTighten the flange nuts securelyI NOTE: If the footwells have been removed, see Footrests
in this section 9Set the storage compartment box into position; then install the storage compartment cover making sure the