2005 Arctic Cat ATVs factory service and repair manual, Page 627Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 627

CLEANING AND INSPECTING I NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
and secure with four machine screws and flanged nutsTighten securely 4Disconnect the battery (negative cable first); then
remove the battery 3Install one shoulder screw and three plastic rivets (on each side) to secure the front of the rear body
panel to the footwells 5Disconnect the taillbrakelight; then remove the gas tank cap and lift off the rear body panelInstall
the gas tank capINOTE: If the front body panel has not been removed, the left-side and right-side panels and the two machine