2005 Arctic Cat ATVs factory service and repair manual, Page 644Get this manual

2005 Arctic Cat ATVs factory service and repair manual, Page 644

REMOVING 1Remove the seat; then remove three installable rivets securing the left side panel and remove the panel 5Using
2Using new lock nut (B), secure the shift rod to the upper shift arm; then using two open-end wrenches, tighten securely
3Remove two cap screws, two self-tapping screws, and three nylon ties securing the left-side splash panel and remove the
panel 3Place the snrine into position between the unner shift arm and shift lever; then making sure the O-rings are in place
on the axle, secure the shift lever to the arm with the existing axle and nut 4Check shift lever adjustment (see Section
2); then tighten jam nut (A) securely5Install the left-side splash panel, left side panel, and seatMake sure the seat locks
securely4Remove the axle and nut securing the shift lever to the upper shift arm; then remove the shift leverAccount for