2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 15Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 15

3Remove the vent plugs; then (if necessary) fill the battery with distilled water to the upper level indicated on the battery4Trickle
the battery, make sure the ignition switch is in the OFF position 6Place the battery into position in the ATV and secure
with the hold-down bracket7Attach the vent tube and check the vent tube to make sure it is not crimped or obstructed in any
way and that it is properly routed through and secured to the frame8Connect cables to the proper terminals: positive cable
to the positive terminal (+) and negative cable to the negative terminal (-)Connect the negative cable last 0411-828 400