2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 31Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 31

BCoupling cracked, damaged, or worn SuspensionShock AbsorbersBushings The following suspension system components should be
checked for proper functionRotate the ignition switch to the lights position; the headlights and taillight should illuminateTest
the brakelight by compressing the brake leverThe brakelight should illuminateHEADLIGHT NOTE: The bulb portion of the headlight
is fragileHANDLE WITH CAREWhen replacing the headlight bulb, do not touch the glass portion of the bulbIf the glass is touched,
it must be cleaned with dry cloth before installingSkin oil residue on the bulb will shorten the life of the bulb NutsBoltsCap
Screws Tighten all nuts, bolts, and cap screwsMake sure rivets holding components together are tightReplace all loose rivetsCare
must be taken that all calibrated nuts, bolts, and cap screws are tightened to specificationsFor proper torque values, see
Section 10 Ignition Timing NOTE: On the 650 V-Twin to verify ignition timing, see Ignition Timing (650 V-Twin) in Section