2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 36Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 36

0739-542 2Making sure the brake pedal is fully released and against the stop, check that the holes in the push-rod actuator
fluid level in the reservoirIf the level in the reservoir is not visible in the sight glass, add DOT brake fluid NOTE: If
the holes align, no adjustment is necessary; proceed to step 4 3If the holes are not aligned, loosen the upper nut and rotate
the push-rod and lower nut until the holes align; then hold the actuator and lower nut and tighten the upper nut securely