2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 37Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 37

NOTE: During the bleeding procedure, watch the reservoir sight glass very closely to make sure there is always sufficient
the cover; then slowly compress the brake lever several timesCRemove the protective cap, install one end of clear hose onto
one FRONT bleeder screw, and direct the other end into container; then while holding slight pressure on the brake lever,
open the bleeder screw and watch for air bubblesClose the bleeder screw before releasing the brake leverRepeat this procedure
until no air bubbles are present ! CAUTION This hydraulic brake system is designed to use DOT brake fluid onlyIf brake fluid
must be added, care must be taken as brake fluid is very corrosive to painted surfaces INSPECTING HOSES Carefully inspect
the hydraulic brake hoses for cracks or other damageIf found, the brake hoses must be replacedCHECKINGREPLACING PADS The
clearance between the brake pads and brake discs is adjusted automatically as the brake pads wearThe only maintenance that