2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 38Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 38

3If thickness of either brake pad is less than 3.2 mm (0.125 in, the brake pads must be replacedNOTE: The brake pads should
brake to decelerate to 0-5 mph3Repeat procedure on each brake system five times until brake pads are burnishedPR237 CInstall
the new brake padsDSecure the caliper to the knuckle andor axle housing with the cap screwsTighten to specifications 4Adjust
the auxiliary brake (if necessary)5Verify that the brakelight illuminates when the hand lever is compressed or the brake
pedal is depressed (500650 H1650 V-Twin) Coolant The cooling system should be inspected daily for leakage and damageAlso,
the coolant level should be checked periodicallyWhen filling the cooling system, use premixed Arctic Cat Antifreeze (pn 0638-395)While
the cooling system is being filled, air pockets may develop; therefore, run the engine for five minutes after the initial