2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 40Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 40

5Place the V-belt cover gasket into position; then install the cover and secure with the cap screws making sure the different-lengthed
(see Section 8)CC550 NOTE: The arrow on the V-belt should point forward CheckingReplacing V-Belt (650 V-Twin) REMOVING 3Pinch
the V-belt together near its center and slide the spacer and movable drive face onto the driveshaftSecure the drive face
with nutTighten the nut to specifications 1Make sure that the ignition switch is in the off position; then remove the clamps
(A) and air duct (B) NOTE: At this point, the wedge can be removed from between the driven clutch faces 4Rotate the V-belt