2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 41Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 41

NOTE: Before removing the belt, note the markings (A) (or mark the belt using tape or marker) in order to reinstall in the
Gauge (pn 0444-177) (B) and calipersKX231 ! CAUTION Be sure to install the three bolts in the specified positions or the
tapped holes will be damaged 4Remove the drive clutch cap screw (C) (left-hand threads) and account for two washers and stepped
washer5Remove the drive clutch (C) from the crankshaft using an appropriate clutch puller tool (B) and turning it clockwise
while holding the drive clutch with the drive clutch holder (A) 2If belt width is below the service limit of 28.8 mm (1.13
in or there is damage to the belt, it must be replacedINSTALLING NOTE: Be sure to install the belt in the same direction