2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 72Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 72

1Remove the output shaft assembly (J)2Remove the two shift shafts (E and H)3Remove the reverse shift cam (G) and spacer4Disengage
forks noting their positions for assembling purposes NOTE: Note that the shoulder of the gear is directed to the outside
for assembling purposes AT THIS POINT To service gear shift forks, see Servicing Center Crankcase Components sub-section
10Remove the crank balancer assembly (A)NOTE: When removing the crank balancer assembly, rotate the crankshaft counterweight
away from the crank balancer assembly counterweight 7Remove the reverse idle gear (K) wshaftAccount for the bushing, two
washers, and the circlip8Simultaneously, remove the driveshaft assembly (I) and countershaft assembly (D) 11Using an appropriate