2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 90Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 90

INSPECTING OIL PUMP 1Inspect the pump for damage2It is inadvisable to remove the screw securing the pump halvesIf the oil
procedureAlso, always start with the original shims on the rear shaft 1Place the left-side crankcase cover onto the left-side
crankcase half to prevent runout of the secondary transmission output shaft2Install the secondary driven output shaft assembly
onto the crankcase3Mount the indicator tip of the dial indicator on the secondary driven bevel gear4While rocking the driven
bevel gear back and forth, note the maximum backlash reading on the gauge5Acceptable backlash range is 0.05-0.33 mm (0.002-0.013
in3-47 ! CAUTION The clutch hub and the pressure plate must be seated in the proper positionIf any of the incorrect positions