2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 104Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 104

9Install the two gear shift fork shafts; then verify that the two crankcase half alignment pins are in placeNOTE: Prior
binding or sticking occurs 6From the right side, install the five case half mm cap screws (one inside the case); then tighten
only until snugCC102D NOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs 2Using plastic mallet,
lightly tap the case halves together until cap screws can be installed3From the right side, install the four case half mm
cap screws; then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs 7In
crisscrosscase-to-case pattern, tighten the mm cap screws (from steps 3-4) until the halves are correctly joined; then tighten