2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 105Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 105

NOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs ! CAUTION After completing center crankcase
Phillips-head cap screws 2Place the strainer cap into position on the strainer making sure the O-ring is properly installed
and secure with the cap screws; then install and tighten the oil drain plug to specifications 5Place the gear shift cam plate
and guide onto the gear shift cam making sure the alignment pin was installedSecure assembly with the cap screw coated with
blue Loctite #243Tighten securely 6Attach the spring to the gear shift cam stopper arm 3Place the oil pump into position
in the crankcase and secure with the three Phillips-head screws coated with blue Loctite #243Tighten to specifications3-62