2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 106Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 106

7Install the gear shift shaft 9Place the chain into the crankcase; then secure it from the top side with wire for ease of
the crankcase; then secure with the washer and nut (threads coated with red Loctite #271) tightened to specifications ! CAUTION
The clutch sleeve hub and the clutch pressure plate must be seated in the proper positionIf any of the incorrect positions
are used, the hub and plate will have clearance between them and they will not operate properly 11Simultaneously, place the
primary clutch assembly and the starter clutch housing on their respective shafts making sure the sleeve is properly positioned