2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 107Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 107

14Install the starter clutch shoe and washer; then secure with the starter clutch-shoe nut (left-hand threads)Tighten to
hub holder, install the nut and washerTighten to specificationsNOTE: The washer is directionalCare must be taken to install
it correctly 15Install the release roller assembly making sure the four springs are in position; then using crisscross pattern,
tighten the four cap screws securelyNOTE: Tighten the four roller assembly cap screws in crisscross pattern making sure there
is no clearance between the clutch plates when secured 13Place the primary drive one-way clutch into the starter clutch housing