2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 108Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 108

17Secure the clutch release arm with the cap screw coated with blue Loctite #243Tighten securely 19Tighten the cap screws
Installing Left-Side Components AIdle Gear Assembly BMagneto Rotor 1Place the starter into position on the crankcase and
secure with the cap screwsNote the position of the wiring form 18Place the gasket and right-side cover into position making
sure the release roller guide remains correctly positioned; then install the fifteen cap screwsCC065D 2Place the neutral
switch base assembly into position making sure the two neutral contacts and springs are inside the case and properly positionedSecure