2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 121Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 121

21Install the front and rear fender panels and the front and rear racks (see Section 8)22On VP models, install the gas tank
hole; install the filler plug 19Install the exhaust pipe and secure with two cap screws; then install the muffler onto the
frame brackets and secure with exhaust springs ATV-0075 ! CAUTION If the engine had major overhaul or if any major part was
replaced, proper engine break-in procedures must be followed (see Section 1)If the proper engine break-in procedures are
not followed, severe engine damage may result 20Connect the gas hose to the fuel pump; then connect the vacuum hoseSecure