2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 129Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 129

BRemove each ring by working it toward the dome of the piston while rotating it out of the groove AT THIS POINT To service
cap screws noting the location of the mm cap screw with the washer near the middle of the left-side coverKeep the different-lengthed
mm cap screws in order for installing purposes Removing Left-Side Components ARecoil Starter BStarter Cup CCoverStator Assembly
1Remove the four recoil starter cover cap screwsRemove the recoil starter assembly noting the location of the single washerNote
the condition of the recoil cover gasketReplace if damaged AT THIS POINT To service the recoil starter, see Servicing Left-Side
Components sub-section 4Using Side Case Puller (pn 0644-262) and the mm adapter, remove the left-side cover wstator assemblyNote
the condition of the gasketReplace if necessaryAccount for the two alignment pins and the position of the shifter bracket