2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 150Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 150

9Remove the spiral spring from the case by lifting the spring end up and outHold the remainder of the spring with thumbs
or deteriorationAssemblingInstalling 1If removed, insert the spiral spring into the case with the outer end of the spring
around the mounting lug in the case; then wind it in counterclockwise direction until the complete spring is installedNOTE:
The spiral spring must seat evenly in the recoil case ! WARNING Care must be taken when lifting the reel free of the caseWear
safety glasses to avoid injury 8Remove the protective cover from the starter handle and pull the rope out of the handle;
then untie the knot in the rope and remove the handleNOTE: Do not remove the spiral spring unless replacement is necessaryIt
should be visually inspected in place to save timeIf replacement is necessary, follow steps 9-10 2Insert the rope through
the hole in the reel and tie knot in the end; then wrap the rope counterclockwise around the reel leaving approximately 50