2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 155Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 155

Assembling 1Place the fixed face of the driven pulley on the pulley compressor base making sure the dowel pins are engaged
the sleeve and into the spring anchor hole in the movable faceCD048 2Apply multi-purpose grease to the O-rings and grease
seals on the movable face; then install on the fixed face making sure the alignment marks are properly aligned 6Place the
spring holder on the spring engaging the spring end with the appropriate anchor hole 3Install the three pins and spacers
into the fixed face hub; then pack the cam slots in the movable face with multi-purpose grease 7Assemble the notched-ring