2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 157Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 157

NOTE: Continue to remove, measure, and install until backlash measurement is within toleranceNote the following chartBacklash
driven bevel gear several revolutions in both directions6Examine the tooth contact pattern in the dye and compare the pattern
to the illustrationsATV-0104 Correcting Tooth Contact NOTE: If tooth contact pattern is comparable to the correct pattern
illustration, no correction is necessary 1If tooth contact pattern is comparable to an incorrect pattern, correct tooth contact
according to the following chartTooth Contact Contacts at Top Contacts at Root Shim Correction Decrease Shim Thickness Increase
Shim Thickness NOTE: To correct tooth contact, steps and (with NOTE) of "Correcting Backlash" must be followed and the above
"Tooth ContactShim Correction" chart must be consultedATV-0103 ! CAUTION After correcting tooth contact, backlash must again