2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 159Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 159

Measuring Crankshaft (Web-to-Web) Assembling 1Using calipers, measure the distance from the outside edge of one web to the
circlip2Place the sliding dog onto the countershaft; then secure with the circlipPlace the washer next to the circlip3Place
the low driven gear onto the countershaft making sure the bearing and bushing are properly positioned; then place the washer
onto the shaft4Place the reverse driven gear onto the countershaft making sure the bearing, bushing, and washer are properly
positioned; then secure with the circlip5Place the reverse driven gear dog onto the countershaft; then secure with the circlipNOTE:
The countershaft is now completely assembled for installation Disassembling 1Remove the reverse driven gear dog; then remove
the circlip securing the reverse driven gear2Remove the reverse driven gear and account for the washer, bushing, and bearing3Remove
the low driven gear washer; then remove the low driven gearAccount for the bushing and bearing4Remove the washer; then remove