2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 163Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 163

Installing Right-Side Components AOil StrainerOil Pump 1Place the oil strainer and new O-ring into position beneath the crankcaseTighten
to ensure no binding or sticking occurs 2Noting the directional arrow from removing, place the strainer cover into position
on the crankcase making sure the O-ring is properly installed and secure with the four cap screws; then tighten the oil drain
plug to specifications 6In crisscrosscase-to-case pattern, tighten the mm cap screws to specificationsNOTE: Rotate the shafts
back and forth to ensure no binding or sticking occurs AT THIS POINT After completing center crankcase components, proceed
to Installing Right-Side Components, to Installing Left-Side Components, and to Installing Top-Side ComponentsMD1208 3Place