2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 174Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 174

Installing EngineTransmission NOTE: Arctic Cat recommends that new gaskets and O-rings be installed whenever servicing the
snug6Install two engine mounting through-bolts, two bushings, and two washers; then tighten the through-bolt flange nuts
to specificationsTighten the upper engine mount cap screws (from step 5) to specifications 3Raise the rear of the engine
and place block beneath it; then install the propeller shaft and output flange into the rear drive coupler 7Secure the upper
engine bracket to the engine with the existing cap screw and flange nutTighten to specifications8Secure the exhaust pipe