2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 206Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 206

4Slowly release the friction plate and lift the plate with ratchet guide free of the recoil case; then remove the ratchet
6Remove the ratchet and account for the pin 9Remove the spring from the case by lifting the spring end up and outHold the
remainder of the spring with thumbs and alternately release each thumb to allow the spring to gradually release from the
case10Unwind the rope from the reel and remove the ropeCleaning and Inspecting NOTE: Whenever part is worn excessively, cracked,
or damaged in any way, replacement is necessary 1Clean all components2Inspect the springs and ratchet for wear or damage3Inspect
the reel and case for cracks or damage4Inspect the shaft for wear, cracks, or damage5Inspect the rope for breaks or fraying6Inspect