2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 209Get this manual

2006 Arctic Cat ATVs 400/400TBX/400TRV/500/500TBX/500TRV/650H1/650 V-Twin Service Manual, Page 209

INSPECTING OIL PUMP 1Inspect the pump for damage2It is inadvisable to remove the screw securing the pump halvesIf the oil
fixture such as bench vise; then remove the wing nut, holding handle, flat washer, and pilot bushing leaving the large spacer
on the compressor tool base 4Using suitable marking pen, make alignment marks on the fixed face spring holder and both pulley
faces CD049 CD047 2Place the driven pulley assembly onto the compressor tool base engaging the dowel pins into appropriate
holes in the fixed face of the assembly 5Place the holding handle on the spring holder fitting the two dowel pins into the